You know the disappointment that comes along with it if you’ve ever experienced a hinge point in your work.

You know the disappointment that comes along with it if you’ve ever experienced a hinge point in your work.

Reinforcement for Stained Glass Hinge Points

​ ​Reinforce Hinge Points ​in Stained Glass ​

But, about them rearing their ugly heads when your masterpiece is finally finished if you know how to add reinforcement to ​your artwork, you won’t have to worry!

Without reinforcement, these hinge point can expose their weakness appropriate once you complete assembling your project or, for some pieces, it might take time for them to reveal by themselves.

Regardless of once the weakness affects your artwork, be it right away or months later on, the main element to addressing these points that are hinge with learning to recognize them in the design before even just starting to slice the glass for your task.

The ​blog post, Hinge Points and How They Affect Your Stained Glass Art, is Part 1 of addressing ​hinge points. It yet, now is the time to go back and read through it if you haven’t read. Into the article, We walk you through exactly what a hinge point is, how to identify one, and exactly how you should use the l k itself to eradicate them.

Today’s post​ is about reinforcing the hinge and it’ll produce a lot that is whole feeling ​if you’ve read Part 1.

Now there are always times when we adore the style just the method it is and don’t wish to change it out. Or, perhaps the damage is done and now we only want to reinforce the piece to salvage it and also make certain it does not get any even worse.

Which means this post will guide you through the entire process of reinforcing hinge points, things to utilize and where you should put it.

This post contains affiliate links, meaning, I suggest products and services I’ve used or understand well and may also receive a commission in the event that you purchase them making use of my website link (at no added cost to you.)

​Prevent Bending of a Hinge aim

There are lots of techniques to reinforce work to add security to hinge points, and additionally they frequently belong to 2 categories that are main

  • Reinforcement that goes around a bit.
  • Reinforcement that is added within the design.

Therefore before we dive in to the gritty that is nitty of two methods, let’s l k at a few examples of what reinforcement should do and let us debunk the largest perpetuated MYTH I’ve seen shared all many times by well-meaning hobbyists attempting to help others discover ways to reinforce ​hinge points.

Now, greater question is, “Where should the reinforcement head to stop the hinging?”

Well, let’s have a action straight back from stained glass for a brief moment and put this into everyday training that may ensure it is more clear.

​How to Brace a Hinge aim

In the previous post, We explained that the hinge point ended up being similar to a home that swings start, therefore the myth is the fact that reinforcements must certanly be put along the amount of the hinge.

Therefore allow me to ask you. If the red line shown with this easy drawing of the d r had been the hinge, and blue line the reinforcement, how well do you think this will work to stop the d rway from swinging available?

You think this could work?

Red = Hinge, Blue = Reinforcement

Seems ​fairly apparent ​when you think about it, doesn’t it? Placing the reinforcement over the hinge would work that well n’t at all.

But if we consider the next drawing below, you can observe the ​blue reinforcement line is placed perpendicular towards the hinge. Do you consider this will be any better?

Red = Hinge, Blue = Reinforcement

Even it would work if it were placed in the same orientation but moved to the ​right side of the d r.

Therefore let’s make contact with considering this in terms of stained glass.

We’dn’t want to place the reinforcement where it is shown within the image above for 2 reasons

  1. We can’t actually connect the reinforcement to your cup (and we’re not ​going to utilize glue to achieve this!)
  2. Who wants a line that is extra the glass depriving them of from the beauty of this piece?

So just how concerning the next arrangement? ​

Red = Hinge, Blue = Reinforcement

​We still have the reinforcement going perpendicular towards the hinge, but, it’s less distracting when l king at the d r.

​This may be the foundation for just how our reinforcement will likely be placed within, or just around a stained glass piece to eradicate the weakness of a hinge point. ​

​​Solution # 1 – Reinforce the external sides of this piece

By reinforcing the outer edge of a bit, you don’t need to restrict the design and it can usually function as the easiest and quickest way to reinforce hinges.

Let’s return to the instance used in the article that is last with the image associated with the sun, with a distinct hinge point across the horizon. By putting reinforcement along the edges on both the left and right side of this panel, it is possible to stop the hinge point from bending. Observe how simple that is?

red= Hinge, Blue = Reinforcement

Okay, so l k that is now let’s this piece which has 4 hinge points. You can reinforce it along all 4 edges to cease all the bending .

Red = Hinge Point, Blue = Reinforcement

​As you can observe the concept is easy, but that still makes us with a concern.

​What ​Is Used As Reinforcement?

Panels and suncatchers alike could be reinforced across the edge that is outside you will find plenty materials you can use to help provide stability to hinge points.

What sort of project you are producing, how big it really is, while the complexity associated with layout regarding the hinge points can all influence your selection of what things to utilize. Basically, you are l king to stiffen the area you wish to reinforce acceptably for the project.